Tool Selection - Harvey Performance Company

Tool Selection

The result of your job is only as good as the cutting tool you’ve chosen, so choose right the first time. Our tool selection guides walk machinists through how to identify proper geometries for a job, how to achieve the most from your cutting tool, and what to look for most in a cutting tool manufacturer.

Feature Image – Uses of Chamfer Mill – IMG — Selecting the Right Chamfer Cutter Tip Geometry
November 22, 2019/by Harvey Performance Company

boring bar geometries — How Boring Bar Geometries Impact Cutting Operations
October 23, 2019/by Robert Keever

slitting saw — The Geometries and Purposes of a Slitting Saw
September 10, 2019/by Harvey Performance Company

tplus coating — An In-Depth Look at Helical’s Tplus Coating for End Mills
August 5, 2019/by Harvey Performance Company

reamers — An Introduction to Reamers & CNC Reaming
June 10, 2019/by Harvey Performance Company

Feature Image – Drop Hole Allowance – IMG — When to and Not to Use Drop Hole Allowance
May 6, 2019/by Harvey Performance Company

zplus coating — What to Know About Helical Solution’s Zplus Coating
April 1, 2019/by Harvey Performance Company

Tib2 coating — What to Know About Harvey Tool’s TiB2 Coating
March 8, 2019/by Harvey Performance Company

chipbreaker vs knucklerougher — Chipbreaker vs. Knuckle Rougher End Mills
February 15, 2019/by Allyn Hood

material specific tooling — How Material Specific Tooling Pays Off
February 1, 2019/by Harvey Performance Company

thread mill — Confidently Select Your Next Thread Mill
January 10, 2019/by Ben Holm

engraving and marking cutters — Main Differences Between Engravers & Marking Cutters
November 16, 2018/by Harvey Performance Company