Technical Tips
CNC machining is hard, but it doesn’t always have to be. In this section of “In the Loupe,” find helpful tips and tricks for achieving greatness where it matters most: at the spindle.

End Mill and Milling Troubleshooting Guide
February 4, 2022/by Harvey Performance Company
Causes & Effects of Built-Up Edge (BUE) in Turning Applications
December 10, 2020/by Harvey Performance Company
Understanding Wood Properties for CNC Woodworking Projects
September 1, 2020/by Robert Keever
Hardenability of Steel
April 10, 2020/by Robert Keever
Grappling With Graphite: A Machining Guide
April 1, 2020/by Harvey Performance Company
Benefits & Drawbacks of High and Low Helix Angles
February 5, 2020/by Harvey Performance Company
When to and Not to Use Drop Hole Allowance
May 6, 2019/by Harvey Performance Company
Workholding Styles & Considerations
October 18, 2018/by Robert Keever
Shank Tolerances, Collet Fits, & h6 Benefits
August 14, 2018/by Robert Keever
Slaying Stainless Steel: Machining Guide
June 19, 2018/by Harvey Performance Company
Tips for Machining Gummy Materials
May 15, 2018/by Harvey Performance Company
Tips for Maintaining Tight Tolerances
May 15, 2018/by Harvey Performance CompanySTAY IN THE LOUPE
Sign up to receive the latest machining solutions, tips and tricks & recaps of our most popular posts