Join Harvey Performance Company National Applications Engineer Don Grandt in the fifth episode of In the Loupe TV: High Feed Mills. A High Feed End Mill is a type of High-Efficiency Milling (HEM) tool with a specialized end profile that allows the tool to utilize chip thinning to have dramatically increased feed rates. These tools […]
Watch this video collaboration made with Datron Dynamics and Autodesk using Harvey Tool’s 270° Undercutting End Mill. “Here is another video of our time with @datroncnc and @autodesk testing out our Undercutting End Mill and Miniature End Mill!“ Known for improving surface finish in undercutting, deburring, and multi-axis machining applications, Harvey Tool’s Undercutting End Mills make a great addition […]
Join Harvey Performance Company National Applications Engineer Don Grandt in the fourth episode of In the Loupe TV: Helix Angles. While many factors impact the outcome of a machining operation, one often overlooked factor is the cutting tool’s helix angle. The helix angle of a tool is measured by the angle formed between the centerline […]
Check out this awesome video @bantamtools shared to @harveytools Instagram, which features Harvey Tools’ Pyramid Engraver engraving different depths in some brass. “We’re currently putting together an engraving overview, but we couldn’t wait to share a sneak peek of this brass engraving. We used our 80º metal engraving bit and @harveytool’s pyramid engraver to experiment with […]
Watch this video of Helical Solutions’ HXF Multi-Flute Finisher being used for High Efficiency Milling(HEM) in 17-4 Stainless Steel at 5,348 RPM and 300 IPM, 3/4” ADOC and .030” RDOC. These Helical Solutions Multi-Flute Finishers are engineered to withstand the rigors of aggressive HEM tool paths, while also exceling in light profiling and finishing applications. […]
Watch this video of Helical Solutions’ 5 Flute Variable Pitch Chipbreaker Rougher End Mill roughing out 1018 Steel without any coolant. Ground from solid carbide, Helical Solution’s wide selection of 5 Flute Variable Pitch Chipbreaker Rougher End Mills is specially engineered to reduce harmonics and increase feed rates in a wide range of ferrous materials. […]
Join Harvey Performance Company National Applications Engineer Don Grandt in the third episode of In the Loupe TV: The Material Removal Rate Triangle. Material Removal Rate measures how much material is removed from a part in a given period of time. Every shop aims to create more parts faster, so they can maximize money made […]
Watch this great video from @motocitymachining shared to @helicaltools’ Instagram, which features Helical Solutions’ 3 Flute Square 45° Helix End Mill high efficiency milling in aluminum. “1/2” @helicaltools 3 flute endmill making quick work of some aluminum with high efficiency milling. It is truly impressive.” Designed for outstanding performance and accelerated MRR in aluminum and non-ferrous materials, Helical […]
Join Harvey Performance Company National Applications Engineer Don Grandt in the second episode of In the Loupe TV: Fun With Flute Count. One of the most important considerations when choosing an end mill is determining which flute count is best for the job at hand. Both material and application play an important role in this […]
Looking for a new way to learn more about the machining industry? Harvey Performance Company National Application Engineer Don Grandt is here to help! Tune in to In the Loupe TV to learn about a wide range of topics that will help you become more efficient at the spindle. Watch More From In the Loupe […]